Rotating Horn; Loudspeaker Installation - dB Technologies LVX10 WHITE Bedienungsanleitung

4.

ROTATING HORN

Loudspeaker allows to maintain the same coverage angle by featuring a rotating horn.
The speakers are always supplied by the manufacturer with the horn positioned horizontal by
default at 90° for LVX WHITE series.
If you wish to change the coverage angle (Fig. 1):
- unscrew the fixing screws of the grille
- remove the front protective grille by slightly pressing on one side and taking the grille off
the recessed slots
- unscrew the fixing screws of the horn
- rotate the horn in the desired position (the horn should never be removed from the
driver!)
- tighten the fixing screws of the horn
- put the grille back in the recessed slots and tighten the screws of the grille.
5.

LOUDSPEAKER INSTALLATION

WARNING
Make sure that the loudspeaker is securely installed in a stable position to avoid any
injuries or damages to persons or property.
Before hanging the loudspeaker check all the components for damages, deformations, missing or
damaged parts that may compromise safety during installation.
If you use the loudspeakers outdoors avoid places that are exposed to bad weather.
The loudspeaker has the following mounting options:
- bookshelf
- floor (monitor)
- suspended with support rails or brackets supplied by the manufacturer
WARNING
To hang the loudspeaker use only one eyebolt for each hanging point
The hanging points are of M8 threads for LVX 8 WHITE / LVX 10 WHITE and M10
threads for LVX 12 WHITE / LVX 15 WHITE
Do not unscrew both bolts recessed in the housing!
NO!
YES! YES!
ENGLISH
12