LG UV48 Bedienungsanleitung Seite 9

Operation Mode
ON
3
For cooling or heating operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE
SETTING BUTTONS.
4
Set the fan speed with the remote controller. You can select the fan speed in four steps-low,
medium, high and CHAOS by pressing the INDOOR FAN SPEED SELECTOR BUTTON.
Each time the button is pressed, the fan speed mode is shifted.
Natural wind by the CHAOS logic
❏ For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
NOTE
Auto changeover function is not available for multi system.
1
Press the ON/OFF BUTTON to turn
the unit on.
The unit will respond with a beep.
1
2
Open the door of the remote controller and press the
operation mode button. Each time the button is pressed, the
3
operation mode is shifted in the direction of the arrow.
4
2
CHAOS Air Fan speed is on low.
Cooling Auto
Fan speed is on medium.
Operating Instructions
Soft Dry Heating
(Heat pump model only)
To raise the temperature
To lower the temperature
Fan speed is on high.
Owner's Manual 9