Declaration Of Compliance; Installing The Appliance; Gas Technical Data Table; Electrical Technical Data Table - Lotus CPA-94G Aufstellungs- Und Bedienungsanleitung

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm 2009/142. The
installation must be done observing the norms in force particularly concerning room ventilation and discharging gas
emissions.
N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our sales
conditions.
• The operations for installing, conversions for use with other types of gas and starting up must be done only by
qualified personnel whose qualifications comply with the norms in force.
• Gas installations, the electrical connections and the rooms in which the appliances are installed must comply with
the norms in force in the Country in which the installation is effected; above all, the appliance must be installed in
a well ventilated room, preferably under an extractor hood, so as to ensure the complete extraction of gas emissions
which are formed during combustion. The air necessary for combustion is 2m3 /h per kW of power installed.
During installation it is necessary to observe a maximum distance between the front edge of the supporting cabinet and
the appliance. (See drawing at item "emptying the water tub")
MODEL
DIMENSIONS
NOMINAL HEAT OUTPUT (kW)
GAS CONNECTION ISO R7
WATER FILLING
WATER DRAINAGE
MODEL
CP-94G
CP-98G
CPB-98G
CPA-94G
CPA-98G
CPP-94G
CPPA-94G
Make sure that the air intake into the room where the appliance is installed is sufficient for an adequate change of air, as
specified by regulations in effect.
The appliances installed in buildings open to the public must satisfy the following requirements.

Installation rules

The installation and maintenance of the appliance must be done according to the correct procedures and regulation
texts in use, particularly:
• safety standards for the prevention of fire and panic.
Connection and installation of appliance, ventilation and exhaust removal systems, shall be done according to the
Manufacturer's instructions and by qualified technicians and according to the regulations in effect. The electric wiring
shall conform to the regulations in effect. All fire prevention codes shall be observed.
a) General indications (Rules valid for GB only)
- For all appliances:
Gas safety Regulations, 1984; Health and safety at Work Act, 1974 Codes of Practice, BS 8173, 1982, The Building
Regulations 1985; The Building Standards Regulations, 1981, the IEE Regulations and the by-laws of the local Water
Undertaking.
The local gas Region or LPG supplier and the local authority and the relevant recommendation of the British Standards
All manuals and user guides at all-guides.com
GB

DECLARATION OF COMPLIANCE

INSTALLING THE APPLIANCE

GAS TECHNICAL DATA TABLE

CP-94G CP-98G
40x90x90h 80x90x90h
13,95 27,9
R 1/2GM R 1/2GM
R 1/2GM R 1/2GM
R 1GF R 1GF

ELECTRICAL TECHNICAL DATA TABLE

MAXIMUM
POWER SUPPLY
ABSORPTION (A)
230V~50/60 Hz
230V~50/60 Hz
230V~50/60 Hz
230V~50/60 Hz
230V~50/60 Hz
230V~50/60 Hz
230V~ 50/60 Hz

CHECKING FOR ADEQUATE VENTILATION

IE
IT CH
CPB-98G CPA-94G
80x90x90h 40x90x90h
31,5 13,95
R 1/2GM R 1/2GM
R 1/2GM R 1/2GM
R 1GF R 1GF
MAXIMUM
POWER (kW)
0,1 0,02
0,2 0,04
0,1 0,02
0,16 0,035
0,32 0,07
0,1 0,02
0,16 0,035
38
CPA-98G CPP-94G CPPA-94G
80x90x90h 40x90x90h 40x90x90h
27,9 23,5
R 1/2GM R 1/2GM
R 1/2GM R 3/4 GM R 3/4 GM
R 1GF R 1GF
POWER SUPPLY
CABLE
(Silicone)
3x 1
3x 1
3x 1
3x 1
3x 1
3x 1
3x 1
23,5
R 1/2GM
R 1GF