Instruction Manual; Intended Use - Makita DUP180 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Max. cutting capacity
Overall length
(Shears part only)
Rated voltage
1
Net weight *
(Shears part only)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
1
* The weight according to EPTA-Procedure 01/2014 is shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING:
Do not use an optional corded
power supply such as battery adapter or portable
power pack with this tool. Do not connect two
or more battery adapters for extension purpose.
Power cords or cables can be accidentally cut by the
shear blades resulting in electric shock, fire and/or
serious injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
Keep bystanders away.
DANGER - Keep hands away from blade.
Do not expose to moisture.
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

The tool is intended for pruning twigs or branches.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-4-5:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
8 ENGLISH
DUP180
ø30 mm
296 mm
D.C. 18 V
0.68 kg
) : 70 dB(A) or less
pA