Ec Declaration Of Conformity; General Power Tool Safety Warnings; Instruction Manual - Makita UA003G Betriebsanleitung

Noise
The typical A-weighted noise level determined accord-
ing to ISO22868(ISO11680-1):
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Vibration
Left handle (Front grip)
2
ah (m/s )
3.1
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
) : 90 dB (A)
pA
2
Uncertainty K (m/s )
1.5
WARNING:
WARNING:
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Right handle (Rear grip)
2
ah (m/s ) Uncertainty K (m/s
2.5 or less
Cordless Pole Saw Safety Warnings
General precautions
Before starting the tool, read this instruction man-
1.
ual to become familiar with the handling of the tool.
2. Do not lend the tool to a person with insuffi-
cient experience or knowledge regarding han-
dling of the tool.
3. When lending the tool, always attach this

instruction manual.

4. Do not allow children or young persons under
18 years old to use the tool. Keep them away
from the tool.
5. Handle the tool with the utmost care and
attention.
6. Never use the tool after consuming alcohol or
drugs, or if feeling tired or ill.
Never attempt to modify the tool.
7.
8. Do not use the tool in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
9. National regulations may restrict of the use of
the tool. Follow the regulations about handling
of the tool in your country.
Personal protective equipment
1. Wear safety helmet, protective goggles and
protective gloves to protect yourself from
flying debris or falling objects.
2. Wear ear protection such as ear muffs to pre-
vent hearing loss.
12 ENGLISH
Wear ear protection.
The noise emission during actual
Be sure to identify safety mea-
Applicable standard
2
)
1.5 ISO22867(ISO11680-1)