Herunterladen Inhalt Inhalt Diese Seite drucken

Zibro P 125 Gebrauchsanweisung Seite 73

Vorschau ausblenden Andere Handbücher für P 125:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
man_P1xx_1.indd 73
authorised person/service point.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
G
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under pressure
can disrupt the safe operation of geysers, ventilation systems, ovens,
etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
B
INSTALLATION
G
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
1
Ensure that the unit is positioned upright and on a level surface.
2
Place the loose filters in the filter holder.
Take the filter holder out of the air conditioner
Open the filter holder and place the active carbon filter (black) and 3M
HAF filter (white) in the filter holder.
Place the filter fixing component back in the holder.
Place the filter holder back in the air conditioner.
3
Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
4
Please keep a distance of 50 cm between the unit and the wall or other
objects to ensure proper air circulation.
5
Insert both ends of the air exhaust hose J in the round connectors 9. Fasten
the connectors by turning them clockwise onto the hose.
6
Insert one round connector 9 in the backside of the unit 7. Fasten the other
TM
4
73
22-12-10 12:32

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

P 122P 126P 129

Inhaltsverzeichnis