Getting In And Out From The Front; Dismount The Side Parts; Swing-Up The Foot Plates - Tomtar Libra Gebrauchsanleitung

Getting in and out from the front

Fold the foot plates upwards and pivot the leg supports towards the exterior.
(Description see above.)
Place the wheelchair and the current or future seating surface as close to the
front of one another as possible.
Should you wish to transfer from another wheelchair or another seating to the
wheelchair, make sure that the wheels are secured by applying the locking
brake.
Now slide onto the seating surface by twisting your body. Make sure you are
sitting in the seat as far back as possible.
Subsequently, swivel the leg supports back in centre position, fold down the
foot plates and rest your feet thereon.

Dismount the side parts

Push the release lever and pull the
side rest upwards.
By assembling the side rests the
release lever snaps automatically.
Swing-up the footrests
The footrests are easily to swing-up.
For folding the wheelchair the footrests
must be positioned vertically.
36 07/2012/Rev.01
Libra