Climadiff RESERVE-Serie Gebrauchsanweisung Seite 46

settle for at least 24 hours before connecting the
electrical power supply, so that the compressor fluid
feed is correct.
• Proper
overheating. To ensure sufficient ventilation, observe
the installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure
that the appliance is not in contact with walls or with
any hot element (compressor, condenser). Observe the
installation recommendations.
• The appliance should not be placed close to radiators
or cooking hot plates or gas rings.
•
Check that electrical sockets remain accessible when
the appliance is installed.
• When positioning the appliance, ensure the supply cord
is not trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
✓ Install it in an appropriate place (see "Installation
instructions").
✓ Leave the doors open as little time as possible.
✓ To ensure that the appliance operates properly, clean
the condenser regularly (see "Maintenance").
✓ Regularly inspect the door seals and ensure that they
air circulation is necessary to avoid
46