Removing Bowl Lid; Processing - Bosch myMUM MUM57S Serie Gebrauchsanleitung

en operation
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
14
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
15
7.8 Removing bowl lid
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Tool or access-
ory
36
Setting
1-7
1-5
1-5
1-3
1
3-5
3-7
3-7
3-5
Tool or access-
ory
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Only attach and remove tools and
▶
accessories once the drive has
stopped and you have unplugged
the appliance.
Before changing tools or cleaning
▶
the appliance, switch off and dis-
connect it from the mains.
Only use the tools when the bowl
▶
is inserted, the lid is fitted and the
drive covers are in place.
Never open the swivel arm during
▶

processing.

Requirements
¡ The bowl has been inserted.
¡ The required tool is inserted.
Add the ingredients to the bowl.
1.
Press the release button and push
2.
the swivel arm down until it en-
gages.
Attach the bowl lid.
3.
→ "Attaching bowl lid", Page 35
Insert mains plug.
4.
Setting
7
5-7
3-7
M
M
5-7