Tuning Mode - Medion LIFE P15052 Bedienungsanleitung

6.8.2. Aerial
 Select the antenna connection ANTENNA.
 After confirming the selection with O K , confirm the NEXT option by pressing
the O K button.
 A prompt appears. Select YES and confirm with O K . The search will then start.
6.8.3. Cable
Menu option
SEARCH

TUNING MODE

FREQUENZ
(only in DVB-C mode)
MODULATION
(only in DVB-C mode)
SYMBOL
(only in DVB-C mode)
NETWORK ID
(only in DVB-C mode)
 Once you have made the settings, select the SEARCH option and confirm with
O K .
 A prompt appears. Select YES and confirm with O K . The search will then start.
26
Start the station search
This is where you set the search mode. If you have se-
lected NETWORK, only the frequencies that are ena-
bled are searched for programmes. If you have selected
FULL the entire frequency band is searched. However,
this search will take longer.
Set the frequency. Standard stetting is AUTO.
Only active if the NETWORK option has been selected
in search mode.
Set the modulation. Standard stetting is AUTO.
Only active if the NETWORK option has been selected
in search mode.
Set the baud rate. Standard stetting is AUTO.
Only active if the NETWORK option has been selected
in search mode.
Set the network ID. Standard stetting is AUTO.
Only active if the NETWORK option has been selected
in search mode.
Setting