Medion LIFE P15052 Bedienungsanleitung Seite 112

6.8.4. Satellite
Use  to select the satellite for which you want to change the
settings or carry out a search, and then confirm with O K .
EDIT
If desired, press the yellow button to edit the selected satellite.
LONGI
TUDE DI
RECTION
LONGI
TUDE AN
GLE
SATELLITE
BAND
RENAME
ADD
Press the red button to add a new satellite. The setting options are the
same here as under EDIT.
DELETE
Select the satellite that you want to delete from the list and press
the green button. Confirm the prompt by pressing YES.
Select the transponder for which you want to change the settings
or for which you want to start the search.
EDIT
If desired, press the yellow button to edit the selected transpond-
er.
TRAN
SPONDER
FRE
QUENCY
SYMBOL
POLARI
ZATION
Setting
Use the direction buttons  to select the orbit
position WEST or EAST.
Use the number buttons to enter the angle.
Select the frequency band KU or C.
Press the red button to change the name of the sat-
ellite. Press the arrow buttons to select the charac-
ter you require. Press O K to save the new name.
Use the number buttons to enter the frequency.
Use the number buttons to enter the Baud rate.
Press  to select the polarity.
EN
27