Medion LIFE P15052 Bedienungsanleitung Seite 126

TUNING MODE
(only in DVB-C
mode)
FREQUEN
CY(only in
DVB-C mode)
MODULATION
(only in DVB-C
mode)
SYMBOL
(only in DVB-C
mode)
NETWORK ID
(only in DVB-C
mode)
If you have selected SATELLITE as the source, the following
setting options are available:
SEARCH
SATELLITE
TRANSPONDER
SCAN MODE
This is where you set the search mode.
If you have selected NETWORK, only
the frequencies that are enabled are
searched for programmes. If you have se-
lected FULL the entire frequency band is
searched. However, this search will take
longer.
Set the frequency. The default setting is
AUTO.
Only active if the NETWORK option has
been selected in search mode.
Set the modulation
Set the baud rate.
Only active if the NETWORK option has
been selected in search mode.
Set the network ID. The default setting is
AUTO.
Only active if the NETWORK option has
been selected in search mode.
After you have configured all the settings,
press O K . The channel search will then
start.
Select the satellite on which the search
will be started.
Select the transponder on which the
search will be started.
Decide which channels you want to search
for: FREE (free channels), SCRAMBLED
(encrypted channels) or FREE+SCRAM
BLED (free and encrypted channels).
EN
41