Medion LIFE P15052 Bedienungsanleitung Seite 129

44
TRANSPOND
ER
LNB
POWER
LNB TYPE
22KHZ TONE
TONBURST
DISEQC 1.0/1.1
MOTOR
Select the transponder for which you
want to change the settings or for which
you want to start the search.
EDIT
If desired, press the yellow button to edit
the selected transponder.
FREQUENCY
SYMBOL
POLARIZATION
DELETE
Select the transponder that you want to
delete from the list as described above
and press the green button. Confirm the
prompt by pressing JA.
ADD
Press the red button to add a new tran-
sponder. The setting options here are the
same as for EDIT.
Set the LNB power here.
Enter the oscillator frequency for your LNB
type here. The default setting is UNIVER
SAL.
Set the sound here. The default setting is
AUTO.
If your satellite system requires a tone
burst, you can set it to BURST A or B here.
If you have connected multiple LNBs or a
DiSEqC switch to your satellite antenna,
set the desired LNB here.
If your satellite antenna is controlled by
a motor, press  to select the DiSEqC
version. Press the O K button to define
the position of the antenna.
Use the number but-
tons to enter the fre-
quency.
Use the number but-
tons to enter the
Baud rate.
Press  to select
the polarity.