Loading The Salt - Haier XI6C3D0FB Bedienungsanleitung

LOADING THE SALT

The appearance of white stains on dishes is
•
generally a warning sign that the salt container
needs filling.
On the bottom of the machine there is a
•
container for the salt for regenerating the
softener.
It is important to use only a salt that is
•
specifically designed for dishwasher. Other
types of salt contain small quantities of
insoluble particles which over a long period of
time may affect and deteriorate the softener
performance.
To add salt, unscrew the cap of the container
•
on the bottom and then refill the container.
During this operation a little water will overflow;
•
but keep adding salt until the container is full.
When the container is full, clean the thread of
salt residue and retighten the tap.
After loading the salt, it is recommended
•
running a complete washing cycle, or COLD
RINSE programme.
(see reference figure "A" - "A1")
After loading the salt, YOU MUST run a
complete washing cycle, or the PRE-
WASH/COLD RINSE/REFRESH programme.
The salt dispenser has a capacity of between
•
1.5 and 1.8 kg and, for efficient use of the
appliance, it should be refilled from time to
time.
(Only for first start up) When the appliance is
used for the first time, after completely filling
the salt container, it is necessary to add water
until the container overflows.
EN 87