Haier XI6C3D0FB Bedienungsanleitung Seite 104

from "MEMO MODE ON" to "MEMO MODE
OFF" and vice versa.
Switch off the dishwasher by pressing the
•
"ON/OFF" button for 3 secs to confirm the
new setting.
To turn the alarm on again, follow the same
procedure.
ENABLING OR DISABLING DEMO MODE (be
used exclusively in stores)
Enabling
The dishwasher must ALWAYS be off before
you start this procedure.
1. Open the door.
2. Turn on the appliance using the ON/OFF
button.
3. Press the "PROGRAMME SELECTION " and
"DELAY START" buttons together for 5
seconds.
4. "DEMO MODE ON" will appear on the display.
5. If no button is pressed for 30 seconds, the
programme will start, simulating the start of
a wash programme.
The PROGRAMME SELECTION/OPTIONS/
DELAY START options are enabled, and by
pressing these buttons you can simulate the
product's functioning without starting a wash.
Disabling "Demo mode"
WARNING
Once installed, if the appliance works
correctly but the wash cycle does not start
upon pressing the Start button, "Demo mode"
may not have been disabled.
The dishwasher must ALWAYS be off before
you start this procedure.
1. Open the door.
2. Turn on the appliance using the On/Off
button.
3. Press the "PROGRAMME SELECTION" and
"DELAY START" buttons together for 5
seconds.
4. "DEMO MODE OFF" will appear on the
display.
5. Switch off the appliance.
EN 104