Battery Change; Error Codes - Wohler RL 200 Bedienungsanleitung

Error codes

7.5

Battery change

8 Error codes
Error code Error
1E Probe error
2E Sensor defective or sensor
missing
3E Fan overload
NOTE
If several errors occur simultaneously, the error code appears with the following prior-
ity:
1E>2E>3E.
28
WARNING!
A very low battery level can lead to an inaccurate
result display. In this case, change the batteries.
If the battery is low, the unit switches off automati-
cally after 10 minutes.
Slide the cover of the battery compartment
•
downwards.
Insert 3 AA alkaline batteries into the battery
•
compartment. Pay attention to the polarity.
Measure
Send in for repair
Sensor exchange
Send in for repair