Important Notes - Wohler RL 200 Bedienungsanleitung

Important notes

3 Important notes
WARNING!
The Wöhler RL 200 must not be used in an explosive environment. The batteries must
also not be removed from the unit and/or changed in such an environment.
ATTENTION!
During leak detection, the pressure in the refrigeration system must be ≥ 5O psi. In
addition, the area being investigated should be draught-free. If there is a draft, the
leaked refrigerant gas will be quickly diluted or blown away from the leak source, which
will affect the detection accuracy. If refrigerant is leaking from a known source in the
vicinity, it should be blown away with a fan before leak detection to avoid its influence
on accuracy.
ATTENTION!
Automatic sensor zeroing is preset as standard. After the warm-up phase, the Wöhler
RL 200 automatically sets the value of the current ambient refrigerant concentration to
zero. If the user has deactivated the automatic sensor zeroing, he can manually set the
current ambient refrigerant concentration to zero by briefly pressing the "Reset" button,
cf. chapter 7.2.
22