Occupation balanced XLR connection:
Input
LINE
Here, you can connect the line signals via balanced or unbalanced jack plugs.
Please note: Never activate the phantom power when connection unbalanced jack plugs. The voltage
between the pins may lead to severe damage!
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Inserts
Inserts can be used for dynamic processors, equalizers or other sound effectors modifying the original signal
completely.
The signal is separated, led outside and inserted at the same position after being modified.
The inserts are pre EQ, AUX and fader and are sent and received via the same jack plug.
Balanced use with XLR connectors
2
1
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
3
For unbalanced use pin 1 and pin 3 have to be bridged
1
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
20
2
3
Output