Bosch GIC 12V-5-27 C Professional Originalbetriebsanleitung Seite 33

▪ <Date & time>: You can set the date and time for saving files and select the date
and time format.
Note: If the date and time can no longer be saved, the built-in coin cell is drained.
Contact an authorised Bosch-after-sales service centre if this happens.
▪ <Language>: Select the language used in the display.
▪ <Switch off after ...>: Choose the time interval after which the inspection camera
will switch off automatically if no button is pressed.
– <Device info>: Here you will find device information, such as the installed software
version and legal information.
– <Factory reset>: You can reset all of the menu options to factory settings. This also
simultaneously, permanently delete all of the saved files.
Saving/Transferring the Recordings
Taking Photos/Videos
If a micro-SD card (20) is inserted, the photos and videos are saved on the card.
If no micro-SD card is present, photos are stored on the internal storage on the inspec-
tion camera and it is not possible to take videos.
Photo mode: Press the photo/video recording button (12) to take a photo of the current
display view.
Video mode: To start filming a video, press the photo/video recording button (12), to
stop recording, press the photo/video recording button (12) again or the centre
button (9).
You can switch between photo and video mode in the <Main menu>.
Data transfer overview
– Transferring photo files from the internal storage to the micro-SD card (20): When
a micro-SD (20) is inserted, a request appears in the display asking whether the data
saved on the inspection camera's internal storage should be transferred to the micro-
SD card.
– Transferring photo files from the internal storage via USB Type‑C®: Transfer is only
possible if there is no micro-SD card (20) inserted in the inspection camera.
– Transferring files from the micro-SD card (20): You can transfer files from the inser-
ted micro-SD card (20) either via USB Type‑C® or by removing the micro-SD
card (20) and inserting it into another device.
Inserting the micro-SD card
Open the top flap (16) and push the micro-SD card (20) all the way into the slot (18),
paying attention to the correct orientation. Carefully close the top flap again.
Bosch Power Tools
English | 33
1 609 92A 89L | (17.03.2023)