FLORABEST 289427 Montage-Und Sicherheitshinweise Seite 12

Assembly / disassembly
Q
Note: For assembly you will need a working space
at least 16 m in area and 4 m in diameter.
2
Note: If possible have a second person help you
with the assembly.
Note: Keep 4 pieces of approx. 50 x 50 x 5 cm
paving slabs close at hand for the paving stand.
Place the paving slabs evenly on the cross members
of the paving stand.
Assembling the paving stand
Q
j Fit the cross member for paving stand 2
of the cross member for paving stand 1
Figure B).
j Bolt the bottom pole section
cross members. Use the bolts (approx. M8 x
20 mm) with the plain washers
4
(approx. ø 8 mm)
5
Insert the top pole with attachments
j
bottom pole section
stand and screw the two poles together with the
union nut (see Figure D, step
13
Opening the umbrella top
Q
j Push the arm upwards until it meets the stopper
7
(see Figure E, step
18
in place by pushing the plastic sleeve
downwards (see Figure E, step
Push the handle upwards until it meets the
j
12
stopper (see Figure F, step
10
in place with the locking knob
12
turn the locking knob
to tighten it (see Figure F, step
j Turn the crank clockwise until the umbrella top
14
is completely open (see Figure G, step
8
on top
2
(see
1
to the assembled
3
(see Figure C).
into the
6
attached to the paving
3
).
1
). Lock the support rod
1
17
).
2
). Lock the handle
1
. To do this
11
in the clockwise direction
11
).
2
1
Turning the umbrella roof
Q
Release the lock on the handle
j
locking knob
moves freely (see Figure G, step
j Swivel the umbrella top
position (see Figure G, step
j Lock the handle
. To do this turn the locking knob
11
clockwise direction to tighten it (see Figure G,
step ).
4
Inclining the umbrella top
Q
j Release the lock on the handle
locking knob
moves freely (see Figure H, step
j Push the handle
inclination angle is reached (see Figure H,
step ).
2
Lock the handle
j
. To do this turn the locking knob
11
clockwise direction to tighten it (see Figure H,
step ).
3
16
).
by turning the
12
anticlockwise until the handle
11
).
2
into the desired
8
).
3
in place with the locking knob
12
11
by turning the
12
anticlockwise until the handle
11
).
1
downwards until the desired
12
in place with the locking knob
12
11
12
in the
12
in the
GB/IE 11