Manual Connection Setup - Avtech NETWORK VIDEO RECORDER Serie Kurzanleitung

2.2 Manual Connection Setup

To manually assign a channel to connect to the IP camera, select a corresponding "PROTOCOL" from the drop
down list first, click "URI" to enter the address of the camera, and enter its port number. There are four protocol
types available in the drop down list as follows: "AVTECH", "ONVIF", "RTSP OVER HTTP", and "RTSP OVER
UDP". If you are using AVTECH IP cameras, please select "AVTECH"; otherwise, choose the protocols your
cameras support.
CONNECTION CHANNEL
CAMERA
CH1
DETECTION
CH2
ALERT CH3
NETWORK CH4
DISPLAY CH5
RECORD CH6
NOTIFY
EXIT
All manuals and user guides at all-guides.com
ADVANCED CONFIG
PROTOCOL
AVTECH ://ip_office.ddns.eagleeyes.tw
ONVIF ://10.1.1.14
RTSP OVER HTTP ://10.1.1.30
RTSP OVER UDP ://10.1.1.12
AVTECH ://10.1.1.16
AVTECH ://10.1.1.13
6
URI PORT PA TH
:80 /
:88 /
:88 /
:88 /
:88 /
:88 /
CONNECTION
CONFIG
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP