Attach Bracket To A Tv With An Irregular Back - Sanus VMF322-B1 Bedienungsanleitung

1-2 Attach bracket to a TV with an irregular back

1
[17, 18]
[16]
[02]
M4
[17]
[16]
6901-002142 05
2
[02]
[16]
[14]
[09]
1. Push the shoulder washer [16] through the appropriate
openings of the brackets [02].
2. Snap shoulder washer [16] into the spacer you selected
[02]
in step 1-1.
If your TV has a curved or obstructed back, or if you need
more room to accommodate cables, recesses, or protrusions,
use either the 14mm, or 24mm spacer [17 or 18].
In step 1-1 if you selected the:
M4 x 30mm screw [09] use the M4 washer [14] and spacer
[17].
M6 x 40mm screw [11], use the M6/M8 washer [15] and
spacer [18].
M8 x 40mm screw [13], use the M6/M8 washer [15] and
spacer [18].
Confi rm that the brackets are level on the back of the TV.
Standard confi gurations are shown. For special applications,
or if you are uncertain about your hardware selection,
contact Customer Service.
OR
M6/M8
[02]
[18]
[16]
[15]
[11, 13]
[02]
7