Aux Mode - Niceboy Raze Supersonic Xl Bedienungsanleitung

POWER ON / OFF
To turn the speaker on or off, press and hold button (8) for 3 seconds.
If the speaker is left inactive, it will turn off automatically after 15 minutes to save power.
CONNECTING TO A DEVICE
1. Press and hold the on/off button (8) for 3 seconds to turn the speaker on. The speaker is
now in pairing mode for wireless connectivity. Pairing mode is indicated by the flashing of
the operating LED (6).
2. Activate Bluetooth on your device. Select "Niceboy RAZE Supersonic XL" in the list of
available devices.
3. The device will connect to the speaker. A successful pairing is indicated by a tone and the
operating LED (6) lighting up.
When switched on again, the speaker automatically connects to the last paired device.
PLAYBACK
To start or pause a track, short-press button (4). Control the volume by short- or long-pressing
button (1) or (5). Short-pressing button (7) or (9) skips to the next or previous track.

AUX MODE

1. Plug the enclosed 3.5 mm jack cable into the audio port (11); the speaker will automatically
switch to the corresponding mode.
2. Control what music the speaker plays using the device the speaker is connected to.
Control the volume by short- or long-pressing button (1) or (5).
USB FLASH DRIVE AND MICRO SD CARD
Insert a data storage device into the corresponding port (12), (13).
The speaker automatically switches to playback mode, indicated by a tone.
To start or pause a track, short-press button (4). Control the volume by short- or long-pressing
button (1) or (5). Short-pressing button (7) or (9) skips to the next or previous track.
The device supports data storage devices with a maximum capacity of 32 GB and MP3, WMA, WAV
audio format.
FM MODE
Connect the supplied USB-C cable to the charging port (14), it serves as an antenna.
Short press the button (3), the FM mode will announce an acoustic prompt; long press the
button (4) to search and automatically store stations. You end the automatic search with a
short pressing the same button (4). After completing the search, switch between stations by
briefly pressing buttons (7) and (9).
11