Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first use:
•
Inspect the packaging for any damage.
•
Check for correct product being delivered.
•
Check to ensure that the device is free from damage.
•
Check if all the parts/components are included in the package.
•
Check if all approved accessories are included in the package.
•
Check if Product Quality Approval document is included in the packaging. Save this document for future
contact with manufacturer.
•
Make certain the device is properly assembled.
•
Check lifting function and bottom-frame adjustment function.
•
Check if it is possible to move the device in all directions.
3. Using Bure Walker
Standing up and walk training
1.
Ask the user to sit on the edge of the bed or chair. Bring out the walking table and place it in front of the user.
Lock the brakes on the wheels.
2.
Ask the user to place their arms on the armrests. If necessary, ask the user to move forward on the seat base
so that the user reaches the handles.
3.
Ask the user to lean forward. To start raising the walking table, press the UP button on the controller. Raise
the walking table to a desired height.
4.
Unlock the brakes. Adjust the height of the walking table to a desired position
5.
Assist the user while walk training.
4. Using Bure Walker with Gait Training Kit 56-388
•
The support harness has four blue straps with a plastic
buckle allowing for adjustments in length, having steel
carabiner clips at the ends to be fasten to the gait walker.
The carabiner clips on to the metal mounts placed under
the table of the Gait walker.
•
Apply the walker support harness by clipping on the two
front carabiners to the front mounters, one on each side
of the table.
•
Place the user standing up in the walker. Pull back the
harness in between the legs and clip on the carabiners to
the back mounters, one on each side of the table. Adjust
the harness to the user by pulling in the back strap loops.
•
Observe! Intended use of the trainer support harness is to
practise walking. It is not a sitting or lifting
Standing Plate
Attach standing plate by hooks on the main frame of the walker.
I F U
aid.
5
Werbung
Inhaltsverzeichnis
