Dab - SOUNDMASTER ICD2080SW Bedienungsanleitung

DAB mode receives DAB or DAB plus digital radio signal and
displays information about the station, streaming audio and the
program details.
•
Scanning for stations
The first time you select DAB radio mode, or if the station list is
empty, ICD2080 automatically performs a full scan to see what
stations are available. You may also need to start a scan
manually to update the list of stations for one of the following
reasons:
•
Available stations change from time to time.
•
If reception was not good for the original scan, this may
result in an empty or incomplete list of available stations.
•
If you have poor reception of some stations (burbling), you
may wish to list only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
•
Presets
To store an Internet radio preset, press and hold the "PROGRAM" on remote control until
the display shows the "Save preset" screen. Select one of the 40 presets to save the current
station and press "OK" to confirm. Or press 0 to 9 on the remote control to store the current
playing station into the preset directly.
To select a preset, press briefly the "PROGRAM" on remote control, then select one of the
listed preset stations and press "OK" to confirm. Or press 0 to 9 on the remote control to
directly recall the presets.
You can also store stations directly on the device by pressing the station buttons 1-3. To do
this, press and hold the corresponding station button until "saved" is shown in the display.
To recall the saved stations, press the desired station button.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as program name,
track title and contact details. Stereo broadcasts are indicated with an icon at the bottom of
the screen. To view further information, press "INFO" button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed,
cycling through DLS text, program type, ensemble name/frequency, signal strength/error
rate, bite rate/codec/channels and today's date.

DAB

15
ICD2080 / English Instruction Manual