Getting Started / Set Up; Get The Network Environment Ready; Main Menu; System Settings - SOUNDMASTER ICD2080SW Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Connect the unit to a suitable power source using the power supply provided. After showing a

starting screen, it will enter the last used listening mode. When the unit is started for the first

time, the setup wizard will be launched automatically.

Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security

password to activate the connection.

You may also use the WPS (WiFi Protected Setup) function for easy pairing between the

network device and ICD2080. Check if the light indicators on the network device are in

appropriate status.

You can also connect the device to your router with a LAN cable (not included). To do this, plug

one end of the LAN cable into the LAN socket on the back and the other end into a free socket

in your router.

Under the main menu, you can select the following modes:

Internet Radio, Spotify, Media player (USB), DAB, FM, Bluetooth®, CD,

AUX-In, Sleep and Alarm.

At the first time operation, system asks if you want to start the Setup

Wizard. The Setup wizard guides you through the basic setup

parameters for Time/Date and Network connection. To change any

settings later all setting functions are accessible from the Settings Menu.

Note: If the setup wizard is terminated prematurely without a network

setup, the device generates its own WiFi access so that the device can

be configured using the UNDOK APP.

Network connection indicator:

= Network connection established.

= Network connection not established.

1. Language

Select the desired menu language.

2. Product privacy policy

So that the installation can continue, please confirm the privacy policy with the

"NAVIGATE / OK" button.

Further information are available under

3. Setup wizard

Select the "YES" option to continue with the setup. If you select the "NO" option, the next

display asks you whether the setup wizard should be started the next time the device is

switched on.