Time/Date; Brightness; Language; Software Update - SOUNDMASTER ELITELINE ICD2060 Bedienungsanleitung

ICD2060 remembers the last four wireless networks it has connected to, and
automatically tries to connect to whichever one of them it can find. From here you
can see the list of registered networks. You can delete unwanted networks by turning
and pressing then choosing YES to confirm delete.
•
Keep network connected
If you choose to keep network connected, the WiFi will not
disconnect even you are in standby mode. Otherwise, the
connection will only available in internet radio and music
player modes.
When Keep network connected is selected the standby
power consumption is raised.
Set the time manually or automatically update, time format, time zone and daylight.
You may change the backlight of each environment (Normal or standby) to High, Medium High,
Medium, Medium Low, Low or Off
Change it as your preference.
From time to time, software upgrades may be created with bug fixes and/or additional features.
You can either check manually or set ICD2060 to check periodically automatically (this is the
default). If newer available software is detected, you will be asked if you want to go ahead with
an update. If you agree, the new software is then downloaded and installed. After a software
upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that ICD2060 is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.
View the firmware version and the radio ID.

TIME/DATE

BRIGHTNESS

LANGUAGE

SOFTWARE UPDATE

INFO

9
ICD2060 / English Instruction Manual