Service; Maintenance Advice; Maintenance Table; Cleaning The Tool - pellenc EXCELION ALPHA Bedienungsanleitung

6. SERVICE

6.1. MAINTENANCE ADVICE

Caution
Always disconnect the tool battery before starting tool maintenance.
• Use products recommended by PELLENC.
• In the event of any problem, consult an authorised PELLENC distributor.

6.2. MAINTENANCE TABLE

Maintenance task
Cleaning the tool (not with a high
pressure water jet but instead by
blowing or brushing)
Visual check of the machine's safe-
ty devices (carrying plate, safety cas-
ing, etc.)
Functional check of the safety throttle
trigger
Tightening of the cutting head at the
shaft attachment (check for deforma-
tion or wear).
Visual inspection of the cutting tool
at the shaft attachment (check for de-
formation or wear).
Check the battery level.
Machine check by an approved PEL-
LENC dealer.
Removing the cutting head for clean-
ing
Battery

6.3. CLEANING THE TOOL

Warning
Do not use a high pressure cleaner.
GRASS STRIMMER EXCELION ALPHA
53_144013_C
At each
Daily
start-up
X
Every
two hours
X
X
X X
X X
X
Please refer to the battery operating instructions
After Every year or
each use as necessary
X
X
X
X
X
71