Commissioning; Contents Of The Kit; Fitting/Removing The Safety Casing; Fitting The Protective Guard - pellenc EXCELION ALPHA Bedienungsanleitung

4. COMMISSIONING

For information about mandatory PPE when handling your tool, refer to Section 2.4, "Personal Protection Equipment
(PPE)".

4.1. CONTENTS OF THE KIT

Make sure the kit contains:
• A grass strimmer fitted with:
• 1 ALPHA CUT cutting head (8)
• 1 spool of Ø 2.4 mm strimmer wire
• 1 carrying eyelet (2)
• 1 carrying strap (1)
• 1 round handle (4)

4.2. FITTING/REMOVING THE SAFETY CASING

Caution
Always disconnect the battery before performing maintenance on the cutting head.

4.2.1. FITTING THE PROTECTIVE GUARD

1. Position the protective guard and the 4 screws.
2. Tighten the 4 screws to a torque of 3.5 N.m using a
T 25 screwdriver.
T25 screwdriver
3.5 N.m
GRASS STRIMMER EXCELION ALPHA
53_144013_C
• 1 protective safety casing and its 4 screws (9)
• 1 Torx 25 wrench
• 1 operating instructions manual
• 1 warranty notice
53