Adjusting The Carrying Strap - pellenc EXCELION ALPHA Bedienungsanleitung

5.1.2. ADJUSTING THE CARRYING STRAP

1. Put on the carrying strap.
2. Adjust the length.
3. Pass the self-attaching fastener end of the strap un-
der the main carrying strap.
4. Fold the self-attaching fastener over the main strap.
5. Slightly loosen the Torx screw on the carrying eyelet
which is on the tool tube.
6. Position the carrying eyelet so that the tool is bal-
anced.
7. Retighten the Torx screw.
GRASS STRIMMER EXCELION ALPHA
53_144013_C
61