pellenc EXCELION ALPHA Bedienungsanleitung Seite 75

2. Preparing the strimmer wire.
Important
The maximum length of the strimmer wire
should be:
• 3.5 m for Ø 2.4 mm.
The minimum length is one turn on the wire
spool.
3. Pass the strimmer wire through the eyelets of the
cutting head.
4. Share the strimmer wire evenly on both sides of the
spool (23).
5. Turn the spool (23) clockwise to wind the strimmer
wire.
Important
Make at least one turn to secure the strimmer
wire.
GRASS STRIMMER EXCELION ALPHA
53_144013_C
75