Inhaltsverzeichnis
Werbung
FF desciptor
APPLICATION_CONFIG
LINEARIZATION_TYPE_SEL
SIMULATION_PHYSCAL
INTEGRATION_DATA
DEVICE_CONFIG_PULS_
RADAR
ADJUSTMENT_LIMITS_MIN
ADJUSTMENT_LIMITS_MAX
FALSE_SIGNAL_COMMAND
FALSE_SIGNAL_CMD_
CREATE_EXTEND
FALSE_SIGNAL_CMD_DE-
LET_REGION
FALSE_SIGNAL_CMD_STATE Busy, last command, errorcode
FALSE_SIGNAL_CMD_CON-
FIGURATION1
FALSE_SIGNAL_CMD_CON-
FIGURATION2
ECP_CURVE_AVARAGING_
CONFIG
LEVEL_ECHO_MEASURE-
MENT
ECHO_CURVE_STATUS
PACKET_COUNT
GU_ID_END
ECHO_CURVE_READ
ECHO_EVALUATOR
ECHO_DECIDER
DISPLAY_SETTINGS
SIL_MODE
EDENVELOPE_CURVE_FIL-
TER
EDDETECTION_CURVE_FIL-
TER
EDECHO_COMBINATION
VEGAFLEX 83 • Foundation Fieldbus
Description
Medium type, media, application type, vessel bottom, vessel
height
Type of linearization
Physical offset and integration time
Electronics variant, probe type, max. measuring range, anten-
na extension length, adjustment propagation antenna extension
lprapproval configuration
Min. range min.-/max.- values physical, percent, offset
Max. range min.-/max.- values physical, percent, offset
Amplitude safety of the 0 % curve, safety of the false signal sup-
pression, position of the 0 % and 100 % curve in near and far
range
Gradient of the manual sectors, safety at the end of false echo
memory and depending on the import range gating out the fal-
se signals
Averaging factor on increasing and decreasing amplitude
Function measured value filter
Echo curve data
Echo parameters, first large echo, amplitude threshold first lar-
ge echo
Echo selection criteria, fault signal on loss of echo, delay on
fault signal on loss of echo
Indication value, menu language, lightning
Parameters of envelope curve filter, activation of smooth raw
value curve
Parameters of the detection filter, offset threshold value curve
Parameters for echo combination, function combine echoes,
amplitude difference of combined echoes, position difference of
combined echoes
12 Anhang
Unit
%
%
79
Werbung
Inhaltsverzeichnis
