Usage - Beurer IPL 7800 Cool Pro Gebrauchsanweisung

If your treated skin surface produces a reaction (e.g. reddening or swell-
ing), wait until the symptoms have fully subsided and then carry out anoth-
er skin sensitivity test at a lower intensity. If the treated skin surface reacts
again, consult your doctor.

7. USAGE

1. Connect the mains adapter to the USB-C connection
the bottom of the device. Insert the mains adapter into a
suitable socket.
The ON/OFF/intensity button
device is now in standby mode.
2. Briefly hold down the ON/OFF/intensity button
on the device. On the intensity display
1) begins to illuminate continuously in white. The cooling
indicator lamp
and the ventilation starts.
3. If you wish to carry out an application at a higher intensity
level, increase the intensity by repeatedly pressing the
ON/OFF/intensity button
desired intensity.
4. Position the light area
button in order to release a light pulse. Make sure that the
6
light area is in full contact with the skin and that the skin
1
contact indicator lamp
contact. You will see a bright flash and hear a popping sound.
The device will be ready for the next pulse within 1-3 seconds
(depending on the intensity level).
lights up continuously. The
8
3 also begins to light up white continuously
until you have reached the
8
1 on the skin and press the trigger
5 is showing that there is sufficient
on
9
to switch
8
, a small light (level
7
575.03_IPL7800_2023-02-10_01_drawing-on_BEU
36