Pkm KG151-3 Bedienungsanleitung Seite 75

20. Install the freezer door on the bottom door hinge. For this purpose, insert the
hinge pin of the bottom door hinge into the bottom hinge opening of the freezer
door carefully. Hold the door in position.
21. Remove the top hinge hole cover (4) from the left side of the freezer door and
reinstall it on the right side of the door; s. fig. below.
11
22. Align the middle door hinge (5) with the prepared screw holes on the left side of
the appliance properly; s. fig. below (it may be necessary to turn the middle hinge
through 180 to align it to the prepared holes properly -depending on model-).
0
While doing so, insert the hinge pin of the middle door hinge into the top hinge
hole of the freezer door. Screw the hinge tightly.
23. Meanwhile, hold the freezer door with your hand so it cannot drop down.
24. Ensure that the freezer door is installed safely and properly by the hinges.
NOTICE! Adjust the door properly before you finally tighten the screws of
the hinge. The seal must close properly.
5
T
OP HINGE HOLE COVER OF THE FREEZER DOOR
M
IDDLE DOOR HINGE
~ 75 ~