senya My Little Chef SYCP-M018 Gebrauchsanweisung Seite 58

Food family
Knead
The appliance provides 3 kinds of knead program: P1, P2, P3, each program is for different kinds
of cooking use, see above table.
1. Press the pétrir button, appliance enters P1 mode, P1 will be shown in of timer display and
keep flash, press again, it enter P2, then P3, and then P1...
2. Put your food inside Jar, select your program, then press START/PAUSE knob, and the
appliance will finish the program automatically except P1.
CAUTION : As P1 program need put ingredients step by step, this program need your involving to
finish the whole program. When Step 1 finish, machine will beep 3 sounds, the time position
"00:00:00" shows "PHASE 2" and keeps flashing, the pétrir icon also keeps flashing. Now you
need add materials and push START/PAUSE knob to resume the program.
If you do not push START/PAUSE knob to resume the program, after 10 minutes machine will turn
off automatically. To finish step 2, you need add ingredients inside Jar and set the program
manually as below to finish the program :
Temperature: 37°C

Heat Power: 2

Fennels
Green beans
Peas
Leeks
Poirvron
Potato
Early potato
Food
Cod, hake and white fish
Pink prawns
Mussels
Salmon
Trout
Meatballs
Duck breast
Turkey and chicken fillet
Roast pork
30 minutes
30 minutes
20 - 25 minutes
25 minutes
20 minutes
30 minutes
15 minutes
Recommended average time
20 minutes
10 minutes
15 minutes
20 minutes
15 - 20 minutes
35 - 40 minutes
20 minutes
25 minutes
35 minutes
57
Cut in pieces
Whole
Scotland
Sliced
Cut into strips
Cut in pieces
Cut in pieces