4.
Place the jar on the main body making sure it fits properly in its correct position. If the jar is
not properly placed, the product will not operate.
Mixing blade and kneading blade assembly
1.
Fix the sealing ring on the blades unit.
2.
Place the blade on the location provided on the base of the jar. Make sure the base of the
blade aligns with opening provided (see diagram below)
3.
Turn the jar over while holding the blade gently so that it does not fall.
4.
Then place the fixing support correctly (see picture 1) on the underside of the bowl and turn it
clockwise to secure the blade (see picture 2)
To remove the blade from its location :
1.
Turn the jar over and turn the fixing support counterclockwise.
2.
Then remove the blade carefully. Make sure it does not fall suddenly. It may damage it.
NB :
Use a cloth to cover the blades before handling to avoid injury.
If the blade is not properly attached, food or liquids during cooking may splash.
The kneading blade is designed to knead, mix and mix foods without cutting them
Do not use the kneading blade for speeds above 3 as the bowl may vibrate and present a risk.
The distance between the kneading blade and the bowl wall is 1 cm, which could cause food to
46