Technical Data - Ferrida Frd-Ms2115Se Bedienungsanleitung

TECHNICAL DATA

Electric miter saw
Parameter
Voltage
Power consumption
Idle revolutions
Saw disc
Scale of the angle
Vertical angle
Direct cut 0° × 0°
Miter cut 0° × 45°
Miter cut 45° × 0°
Combined saw 45° × 45°
Laser class
Laser wavelength
Laser output
Weight
NOISE AND VIBRATION LEVEL PARAMETERS
Sound pressure level (L
uncertainty K
pA
Sound power level L
uncertainty K
WA
VIBRATION AND NOISE INFORMATION
Noise parameters and their uncertainty were measured according to EN62841-1.
Wear noise protection! Actual noise values depend on the conditions of use of the machine and
may differ from those stated, which are far from being safe values.
WAYS TO REDUCE NOISE AND VIBRATION
You can reduce noise and vibration by using tools with reduced vibration, the way you work, reducing
the time of use and wearing protective equipment.
To reduce the risk of shocks and noise, follow these recommendations:
1. Always use the product in accordance with the instructions and intended use.
2. Ensure that the product is always in perfect condition and properly maintained.
3. Use tools designed for this product and in good condition.
4. Hold the handle of the machine firmly, keep the surface clean.
5. Plan the work with regard to the distribution of exposure over a longer period.
)
pA
wA
Value
220-240 V, 50 Hz
1,500 W
4,500 min
-1
210 mm × 30 mm, 24 teeth
0° to 45° to both sides
0° to 45° to the left
22 × 7 cm
15.5 × 7 cm
22 × 3.5 cm
15.5 × 3.5 cm
2
650 nm
<1 mW
10.5 kg
93.6 dB(A)
3 dB
106.6 dB(A)
3 dB
ENGLISH 9