Regular Inspections - Ferrida Frd-Ms2115Se Bedienungsanleitung

MAINTENANCE
6. Clean plastic parts especially carefully, do not use any chemicals.
ATTENTION: Do not clean the motor, metal parts or the saw with water.
7. Keep tools, instructions and accessories in a suitable safe place. You should always have them
available.

REGULAR INSPECTIONS

• Regularly check the tightness of all screws and especially the outer flange of the disc. They can
be released by vibrations.
• Check the power supply and any extension cords. If the power supply is damaged, it must be
replaced immediately. Replacement must only be carried out by the manufacturer, its represent-
ative or an authorized service centre. There is a risk of electric shock or fire. Do not use or replace
any damaged leads.
• Only a qualified person may replace the engine carbons. Always replace both carbons at the
same time.
16 ENGLISH