ZANKER ZKK 8417 K Gebrauchsanweisung Seite 43

Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Fix cover (Hd) on guide (Hb) until it clips into place.
If the appliance is fixed to the side of the kitchen unit,
simply slacken the screws in the fixing brackets (D),
move the brackets as shown in figure and re-tighten the
screws. Fit cover (E).
8mm
K
Hb
PR168
Hb
Hd
PR167/1
D734
Ha
D
E
43