Sharpening Wedge; Disposal - Zipper Maschinen ZI-HS12TN Betriebsanleitung

The following hydraulic oils are recommended for the hydraulic transmission system of the log
splitter:
 Shell Tellus 22
 Mobil DTE 11
 Aral Vitam GF 22 or
 BP Energol HLP-HM 2
17.3

Sharpening Wedge

This log splitter is equipped with reinforced splitting wedge which blade is specially treated. After
long periods of operation, and when required, sharpen the wedge using a fine toothed file
removing any burrs or flat spots on the edge.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
If the oil level is too low, the oil pump can be damaged,
whereas overfilling can lead to overheating of the
hydraulic system. Therefore check the oil level regularly
with the dipstick - see picture on the left!
Waste oils are toxic and must never be
discharged into the environment. If
necessary, contact your local
authorities for information on proper

disposal.

Change the hydraulic oil:
 Remove the oil drain plug to drain the oil from the
hydraulic system.
 Use a drip pan to collect waste oil and particles.
 Inspect the oil for metal chips. (Metal chips in the oil
are an indication of increased wear.)
 After the oil has been completely drained from the
machine, reinstall the drain plug.
 Top up the recommended fresh hydraulic oil via the
oil filler plug.
 Apply a sealant to the oil filler plug and close it
again.
 After changing the oil, actuate the wood splitter
several times without actually splitting any wood.
 - Use a dipstick to check the oil level.
MAINTENANCE
34