Operating; Splitting Lever; Splitting - Zipper Maschinen ZI-HS12TN Betriebsanleitung

16.2

Operating

16.2.1 Splitting lever

Splitting force and splitting speed are controlled by the splitting lever. The splitting lever is simply
raised or lowered for operation.

16.2.2 Splitting

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
The first half stroke of the splitting lever is idle speed; press the
splitting lever to the half stroke for maximum splitting force at
slower speed to split the log at the beginning or particularly hard
and seasoned logs.
Press the splitting lever to the end for faster speed at less splitting
force to finish the splitting or to split usual logs.
1. Place the log vertically on the support table,
2. Hold the left press lever. Meanwhile, move
so that it lies flat on its face. Press the left
lever to lower the extended log fixing claw
against the log to secure it. The extended log
fixing claw can be adjusted to fit logs with
different heights.
the splitter wedge down by pressing the right
splitting lever to the half stroke to split the
log slowly first and then press it to the end
until the log is completely split.
OPERATION
32