Selecting The Desired Temperature Display - HomeMatic IP HmIP-BWTH24 Installations- Und Bedienungsanleitung

• Press and hold down the control wheel (E) to
open the configuration menu (see fig. 6).
• Select the
wheel and confirm by pressing the control wheel
briefly.
• Turn the control wheel until the desired tempera-
ture appears (±3.5 °C maximum).
• Confirm by pressing the control wheel briefly.
6.9

Selecting the desired temperature display

You can adjust the temperature to be displayed. You can
also define whether the humidity value shall be displayed
or not.
• Press and hold down the control wheel (E) to
open the configuration menu (see fig. 6).
• Select the
wheel and confirm by pressing the control wheel
briefly.
• Turn the control wheel and select
-
-
-
"ACT" to display the actual temperature,
"SEt" to display the setpoint temperature,
"ACtH" for alternating between the actual
temperature and humidity display and con-
firm by pressing the control wheel briefly.
Operating modes and configuration
symbol by turning the control
symbol by turning the control
75