Herunterladen Inhalt Inhalt Diese Seite drucken

System Settings; Setting Time - Peaq PDR300-W Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Mode
Select the mode for the alarm clock here:
• FM: Wake up with FM-Radio
• DAB: Wake up with DAB Radio
• Internet Radio: Wake up with Internet ra-
dio
• Ipod: Wake up with Ipod Music
• Buzzer: Wake up with alarm tone
Volume
Here you can set the volume with which the
alarm clock will be switched on.
Save
Save the alarm setting.
SWITCHING OFF THE ALARM TONE
Once the alarm sounds, press Power and
the alarm is switched off.
SETTING THE SLEEP-TIMERS
This device can be switched over to Standby
mode after a period of time.
Press Sleep and select a period of time:
• [15 minutes]
• [30 minutes]
• [45 minutes]
• [60 minutes]
• [off]
If the sleep timer is not pre-selected, the de-
fault setting is 20 minutes.

SYSTEM SETTINGS

Menu > Main menu > System settings
1. Press Menu and select with Scroll/Se-
lect to <Main Menu>.
2. Select System settings under main
menu. The submenu will then be dis-
played.
PDR300_IM_I_06.indb 65 b1
EQUALISER
Here you can select pre-set sound formats
or create one of your own.
Select a sound format:
Normal, Classical, Jazz, Pop, Rock, Lan-
guage or User Defined
The sound setting is accepted right away.
In User Defined setting, you can create your
own setting for the sound.
BACKLIGHTING
1. Press Menu and use Scroll to select the
submenu BACKLIGHT. Press Scroll to
reach the submenu.
2. Select with Scroll/Select <Power-on
Level>.
3. Select a light setting in the submenu:
• [High]
• [Medium]
• [Low]
4. Press the Scroll/Select key to confirm
selection.
Network Selection
Select this entry to display the list of net-
works with which the Internet radio can es-
tablish an automatic connection or select the
entry network assistant to search available
networks.

SETTING TIME

Follow the instructions in the section on set-
ting time.
ENGLISH
65
7/23/13 4:50 PM

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pdr300

Inhaltsverzeichnis