Station List - Peaq PDR300-W Bedienungsanleitung

PRIVATE NETWORK CONNECTION
Select WPS connection type
If a network is protected by a WEP or WPA
encryption, the query for constructing a con-
nection over WPS (Wi-Fi Protected Setup)
appears. If the router of your wireless net-
work has a WPS function, select whether the
WPS connection should be established by
entering a PIN code over the WPS key on
the router.
WPS connection using PIN entry
A WPS-PIN appears in the Internet radio dis-
play. Enter this PIN and confirm the Internet
radio with OK. The WPS connection will then
be established.
Connection using WPS key
Press the WPS key on the router and then
confirm the display on Internet radio with
Select. The WPS connection is then estab-
lished.
CONNECTION USING THE DIRECT EN-
TROY OF THE NETWORK KEY
If you do not want to establish any connec-
tion using the WPS, select the entry, No
WPS and then enter the network key in the
following dialogue. Confirm the entry with
Select.
Key:
0
1 2 3 4 5 6 7 8 9 . - @ ,
a b c d e f g h i j k l m n
o p q r s t u v w x y z A B C
D E F G H I J K L M N O P Q R
PDR300_IM_I_06.indb 55 b1
COMPLETING THE WLAN CONNECTION
1. The connection begins. The device
should now establish a connection with
the WLAN. Once the connection has
been established, the notification <Set-
up-Assistant is finished> appears.
Confirm the display with Select.
2. If the WLAN cannot be accessed (e.g.
locked for new WLAN devices) the failure
notification "Connection not successful"
appears.
3. In this case, check the setting of your
WLAN-router.
Note
The entered password (WEP/WPA key) will
be saved and will not need to be entered
again.
After a successful set-up and connection,
the following display appears:
Internet radio
Last listened

Station list

Main menu
BKSP
OK
CANCEL
ENGLISH
55
7/23/13 4:50 PM
A