General Settings; Backlight - Peaq PDR360BT-B Bedienungsanleitung

intended use of equipment if the apparatus didn't
receive radio signal on FM mode.
• In Internet radio, Music player, DAB radio,
Bluetooth Audio, CD and AUX in mode, the
unit will automatically go to Standby mode after
15 minutes, if it has no audio playback. Press
Standby button to resume.

General settings

Press and hold MENU in any mode and select
[System] with / . Confirm selection with ENTER.
Following menu options are available:
• [Equaliser]
• [Network]
• [Time/Date]
• [Language]
• [Factory Reset]
• [Software update]
• [Software upgrade]
• [Setup wizard]
• [Info]
• [Backlight]
EQUALISER
Here you can select preset sound formats or
create one of your own.
Select a sound format:
Flat, Classic, Rock, Pop, Jazz
The sound setting is accepted right away.
Alternative you can adjust the sound setting
directly with the button EQ on the remote control.
NETWORK
Select this entry to display the list of networks with
which the Internet radio can establish an automatic
connection or select the entry network assistant to
search available networks.
SETTING THE TIME
1. Select menu option Time/Date with
confirm with ENTER.
2. Use / to select the desired sub-menu:
• Set Time/Date
• Auto update
- Update from DAB
- Update from FM
- Update from Network
- No update
IM_PDR360_190725_A_V06_HR.indb 27
• Set format:
12/ 24 hour display
• Set time zone
• Daylight saving
LANGUAGE
1. Press MENU and enter System settings to
select the submenu LANGUAGE.
2. Select a language and confirm with ENTER.
FACTORY SETTINGS
Select menu option [Factory reset] with TUNING
ENTER and confirm with ENTER.
SOFTWARE UPDATE
You can search software updates with the product.
Once you have accepted the conditions for use,
the download and installation procedure for the
new software updates begins automatically.
Note
Make sure that the product is connected to the
Internet.
SOFTWARE UPGRADE
Installation of the new Software-Updates.
SETUP WIZARD
Press MENU and enter System settings to select
the submenu SETUP WIZARD. You can set up all
settings important for bringing radio into operation.
INFO
Here you can find the version number of the
currently used software.

BACKLIGHT

1. During System settings mode, Press PRESET/
FOLDER (
then press ENTER to confirm.
2. For the other settings under Backlight, press
PRESET/FOLDER (
/ and
the following options and then press ENTER
button to confirm.
Operation mode High/ Medium/ Low
Standby Mode
ENGLISH
) buttons to select Backlight and
) buttons to select
Time out: 10 sec/ 20 sec/
30 sec/ 45 sec/ 60 sec
Standby Level:
Medium/ Low
26/7/2019 11:48
27