Peaq PDR300-W Bedienungsanleitung Seite 54

ENGLISH
THE SETUP-ASSISTANT (WIZARD)
After switching on for the first time, the wiz-
ard will appear. You can set up all settings
important for bringing radio into operation.
• Click on the Yes field to start the Wizard.
Setup wizard
YES
SETTING TIME FORMAT
1. Set the time format for the time display
to 24h or 12h.
2. Select the source for the time synchroni-
zation. The time will be set automatically
over DAB, FM or Internet for the time
synchronisation.
3. If you want to set the time manually, se-
lect the entry None.
4. Then choose the time zone in which you
are located.
5. Set up accordingly if Daylight Savings
Time is to be used.
Date / Time
12 / 24 hour format
12
54
PDR300_IM_I_06.indb 54 b1
Start now?
NO
24 #
SELECTING LANGUAGE
Select the menu language and click on the
entry to select the language.
WLAN-REGION AND WLAN-NETWORK
• Select the WLAN-Region in which you
are located. The device then looks for
available wireless networks. If a wireless
network is not found, the device shows
the notifications <No WLAN network
found>. Please check in this case wheth-
er your router and WLAN are switched
on.
Note
Make sure that the DHCP-server of your
router (Access Point) is activated. Otherwise,
the WLAN connection must be configured
manually. The WLAN should send out the
SSID. If the SSID is not sent out, you must
configure the WLAN manually.
• Select the network from which you want
to operate Internet radio.
PUBLIC NETWORK CONNECTION
Select the appropriate WLAN-network by
clicking on the entry of the network's name.
The connection procedure takes place au-
tomatically.
Note
In the settings menu > Internet settings, you
can manually configure the network.
7/23/13 4:50 PM