Peaq PDR300-W Bedienungsanleitung Seite 53

Operation
ADJUSTING THE ANTENNA
For optimal reception, extend the antenna,
move to fully extend and adjust it.
TURNING THE UNIT ON
Press the Power button to switch the unit
on.
ADJUSTING THE VOLUME
The volume can be adjusted during playback
with the volume control.
PDR300_IM_I_06.indb 53 b1
Internet-radio configuration
There are two ways to connect the radio to
the Internet using an Access Point:
• Wireless in WLAN-Mode
The WiFi-antennae of the radio receives
your DSL router signals.
• With cable using the radio's LAN con-
nection in LAN-Mode
provided an Ethernet network is avail-
able.
WLAN-MODE CONFIGURATION
If you have a wireless network, the WLAN
mode is the direct way to connect your radio
to the Internet:
1. Simply switch the radio on and, as a
cable-less network client, it automati-
cally searches all available APs (Access
Points).
2. When switching on for the first time, you
must confirm the AP and perhaps enter
the key. After that, the radio will always
access this AP. If the AP can no longer
be found, it will be registered accord-
ingly.
LAN CONFIGURATION
If you do not have a wireless network but do
have a cabled network, you can connect the
Internet radio with a network.
1. Switch the radio off.
2. Connect an Ethernet cable to the LAN
socket. Once switched on, the radio will
automatically be recognised as a cabled
client.
ENGLISH
53
7/23/13 4:50 PM