Atag HIDD074EX Serie Gebrauchsanleitung Seite 160

Table continued from last page
Problem
The ceramic glass plate broke.
Error Symptom
code
L L shows on the
display.
C C shows on the
display of the
extractor unit.
Er03 Er03 appears on
display.
ER21 Er21 appears on
display.
E2 E2 appears on
display.
E3 E3 appears on
display.
E8 E8 appears on
display.
In case of other error codes: please write down the error code and contact the service
department.
Possible cause
Possible cause
Child safety lock is activated.
Saturation of the odour filter.
The control panel is dirty or has
water on it.
You have pressed two or more
keys at the same time.
Overheating.
Excess temperature of the
induction element. Empty
cookware might have been
used.
Wrong pan.
Malfunction of the extractor unit.
The extractor unit may be
blocked.
Troubleshooting
Solution
Pull the plug out of the socket.
Contact your installer.
Please note! Do not throw a
broken ceramic glass plate in
the glass recycling bin but take
this to the Municipality's waste
recycling centre.
Solution
See chapter 'Operation of the
hob/Child safety lock'.
It is necessary to perform
maintenance of the odour filter
(see 'Maintenance/Cleaning the
grid and filters).
Clean the control panel.
Do not operate more than one
key at the same time.
Let the hob cool down.
Do not heat empty cookware.
Use appropriate pans.
Remove any blockages and
clean the extractor unit.
35