Adjusting The Timer - Qlima S95 Gebrauchsanweisung

ADJUSTING THE TIMER

To activate the air conditioner at the desired time, follow the procedure specified below (the remote
control and air conditioner are switched off):
1. Press the Timer button.
2. Select the desired mode by pressing the Mode button.
3. Select the desired temperature by pressing the
possible when the 'cool' or 'heat' mode is selected).
4. Select the ventilator speed (low, medium or high) or automatic mode
(only possible when the Feel, Cool or Heat mode is selected) by pressing
the Fan button.
The ventilator always operates in the Auto mode when the Dry mode is
selected.
5. Select Swing or no Swing by pressing the Swing button.
6. Press the Timer button ('h' flashes).
7. Use the button to select the time at which the air conditioner must
activate (between 0 and 10 hours can be set at every half hour –
between 10 and 24 hours can be set at every hour).
8. Press the Timer button ('h' stops flashing) and the preset time appears
in the display.
9. Press the Timer button again to delete the selected data from the memory.
Note: If no buttons are pressed during the programming of the timer function, the remote control will
switch off automatically after 10 seconds.
To switch the air conditioner off at the desired time, follow the procedure specified below (the remote
control and air conditioner are switched off):
1. Press the Timer button.
2. Use the button to select the time at which the air conditioner must deactivate (between 0 and 10
hours can be set at every half hour – between 10 and 24 hours can be set at every hour).
3. Press the Timer button ('h' stops flashing), and the preset time will appear in the display.
4. Press the Timer button again to delete the selected data from the memory.
Note: If no buttons are pressed during the programming of the timer function, the remote control will
switch off automatically after 10 seconds.
Note: if 'h' is flashing and you press the ON/OFF/RUN button once, the preset temperature will appear in
the display. You can now adjust the temperature with the
display the time, which can now also be adjusted*. If the Timer button is pressed again, the data is stored
and the remaining time (that the air conditioner will be in operation) will appear in the display.
* Pressing the ON/OFF/RUN button instead of the Timer button deactivates the remote control.
Note: check that the TIMER INDICATOR on the indoor unit lights up after the timer has been set.
Press the Timer function to check the settings in the display.
button (only
button. Press the Timer button again to
4
97