Pkm GS 175.4 A++NF N Bedienungsanleitung Seite 48

5. Tilt the appliance by max. 45
and the screws securing the right hand hinge plate,
and the fixing plate.
6. Remove the hinge pin (1) and fix it in position 2.
Fix the hinge on the opposite side. Fix the foot.
7. Fix the fixing plate with 3 screws on the
opposite side. Fix the foot.
8. If the door seal does not fit the housing on any
side, warm it with hot water and press it carefully
on the housing. Adjust the door properly and
check that the door seal closes correctly before
you tighten the hinge-screws. Reinstall the top
Remove the covers and the screws securing
the handle on the door. Detach the handle
und turn it by 180
side.
0 and remove the feet
Door handle position
0 . Fix it on the opposite
48